15 June 2010
SPARC TECHNICAL JOB FAIR
SPARC TECHNICAL JOB FAIR. BE B.Tech MCA : 2009 2010 Passout
Summary
Experience: 0 - 2 Years
Location: Bengaluru/Bangalore, Hyderabad / Secunderabad
Compensation: Rupees 1,00,000 - 3,50,000
Education: UG - B.Tech/B.E. - Any Specialization,BCA - Computers PG - Any PG Course - Any Specialization
Industry Type: IT-Software/ Software Services
Role: Software Developer
Functional Area: Application Programming, Maintenance
Campus Select India Pvt. ltd., one of the leading campus advisory company in South India in association with Sambhram Institute of Technology, Jallahalli, East Bangalore is organizing "SPARC Pragati – Tech" Technical Job Fair 2010 in Bangalore for BE and MCA, 2009 and 2010 Pass outs on the 18th and 19th of June. Some of the companies that are participating are
ITC
Wipro
Nitesh Estates
Captronic Systems
Global Edge
Kristal Group
Permeative Technologies
Hewlett-Packard (Hp)
Maruti Suzuki – Mondovi / Pratham /RNS /Klyani
Reliance ADAG
And Many more companies will be participating in the event
Date and Timings:
18th June 2010 – 9.30 am to 5.00 pm
19th June 2010 – 9.30 am to 5.00 pm
Interview process:
Written test
GD
Personal Interview
Registration Fee of Rs.200 for 2 days needs to be paid at the venue on the day of the event
Venue:
Sambhram Institute of Technology (SaIT)
Amba Bhavani Temple Road, Near M.S.Palya, via Jalahalli East, Jyothinagar
Bengaluru, Karnataka 560097
Please click on the link below and upload your details , this will avoid filling details at the venue.
Contact Details
Company Name: Campus Select
Website:
http://www.campusselect.in
Executive Name: Leon/ Farooq
Email Address:
resume123@campusselect.in
Telephone: 080-42042561
11 June 2010
Microsoft India GTSC’s pool campus recruitment drive
We take pleasure in inviting you for a pool campus drive for Microsoft India Global Technical Support Centre's recruitment drive to be held at Oxford College of Engineering in Bangalore on 18th June 2010. Please find below the eligibility criteria and other important information for the drive. Kindly send us the details in the format attached latest by 12th June 2010.
Eligibility Criteria:
i) Year of Passing: 2010
ii) Streams: CS, IT and ECE
iii) Percentage: CGPA Above 7.0 / 70% Aggregate
Venue: Oxford College of Engineering
Address: 10th Milestone, Bommanahalli, Hosur Main Road , Bangalore - 560 068
Landmark:
1) 2 Kms from Silk Board Jn. (towards Hosur / Electronics City direction).
2) Faced opposite to Bosch on Hosur Main Road (after Silk Board and towards Electronics City )
Date of Test: 18th June
Timings:
Candidates reporting time: 8:30AM
Presentation: 9:00 AM to 10:00 AM
Test Time: 10:00 AM to 12:00 PM
Results announcement time: 4:00 PM (Shortlisted candidate's details will be mailed
to the respective placement officers and mails to the Shortlisted candidates will also be sent).
Interview dates: 19th and 20th June @ Microsoft Office Bangalore.
Interview timings: Will be mentioned in the mails sent to the candidates.
All the eligible candidates are requested to bring the following documents.
i) Latest photograph.
ii) Updated Resume.
iii) College Photo ID Card.
For more information please refer the link https://careers.microsoft.com/careers/EN/IN/gtsc.aspx .
02 June 2010
SAP is Recruiting 2010 batch pass out students from Dr.AIT
SAP is recruiting Freshers
(2010 batch pass outs) from Dr.AIT.
Eligibility Criteria: Students should have
70% and above in 10th, 12th, BE/Btech.
The Dr.AIT 2010 pass out batch students will get a call from SAP HR team regarding the interview schedule shortly.
Interview Process:
Written Test
Technical Interview-1
Technical Interview-2
Managerial Round
HR Round
Recruitment drive by HCL Technologies
HCL Technologies is recruiting
B.E./B.Tech/MCA candidates
who graduated in 2010 for
fresher positions.
fresher positions.
Please upload information in the below link.
19 May 2010
TESCO Recruitment Drive on 29th May 2010
Hi All,
TESCO is hiring Freshers in IT Services!
The Eligibility criteria is as below
- BE 2010 batch only
- Minimum of 65% aggregate
- Excellent communication Skills
- Flexible to work in shifts / weekends
- Open to work in Support or Development projects
walk-in for Dr.AIT students is on the 29th May, 2010, Saturday.
It is an on the spot registration. Registration is open till 12 noon. All the streams are eligible for this recruitment drive.
NOTE:
- Event starts from 9 AM & registration closes at 12 noon.
- Shortlisted candidates post aptitude/ technical tests would be interviewed either on the same day or the subsequent Monday.
Looking forward for your participation,
Talent Acquisition Team
Regards,
Nyna Rao
TESCO-HSC
15 May 2010
BAeHAL Campus recruitment in Dr.AIT
BAeHAL is looking for 30 to 50 engineers from Dr.AIT.
Company would like to visit Dr.AIT campus for recruitment as per the availability of students.
BAeHAL need engineers in following streams: -
- Mechanical Engineering
- Electronics and communication
- Electrical Engineering
- Mechanical Engineering
- Electronics Engineering
- Instrumentation Technology and Computer Science
All students have to take aptitude test. Based on the aptitude test students will be selected for Face- to Face personal interview.
Students those who are selected in interview will be advised about company policy and terms & condition. The salary and terms and conditions are as follows:-
All original educational certificates will be deposited with BAeHAL for three years. Employees can take their certificates after settling the above amount or completion of three years.
IF You are interested for applying for BaeHAL., then please send your details ( Full name,USN,email ID,contact no.,10th %, 12th %, aggr till 7th sem ) to rajeshbv05@gmail.com within Monday, 17th May 2010..
11 May 2010
Pooled Campus Recruitment Drive in SJBIT
There is a pool campus recruitment drive by M/s Mahindra satyam at SJBIT on Saturday, the 13th May 2010.Please find below the batches and timings for the online aptitude test
Scheduled on 13th May 2010 by M/s Mahindra Satyam at SJBIT.
The students may be informed to be present at the reporting time indicated
in the schedule below.
The students should carry the following documents:
a) College ID card
b) Copies of marks cards
c) Copies of resume
d) 2 Passport size photographs
e) Project Report
Dress Code: Formals
Please ensure that the students do not carry mobile phones.
Please note:
Only those students whose names have been displayed in the
Database in their respective colleges will be allowed for the test.
| Pooled Campus Recruitment Drive by M/s Mahindra Satyam | |||||
| at SJBIT | |||||
| Online test - Batches & Timings | |||||
| Date : 13.05.2010 | |||||
| SL |
Name of the College
|
No. of Students
|
Batch
|
Reporting Time
|
Venue
|
| 1 |
City Engineering College
|
129
|
1st Batch
|
8.00 am
|
CSE / ISE Block
|
| 2 |
RNS Institute of Technology
|
109
| |||
| 3 |
JSS Academy of Technical Education
|
102
| |||
| 4 |
APS College of Engineering
|
57
| |||
Total
|
397
| ||||
| 5 |
Dr. Ambedkar Institute of Technology
|
242
|
2nd Batch
|
9.30 am
|
CSE / ISE Block
|
| 6 |
KS Institute of Technology
|
143
| |||
| 7 |
BGS Institute of Technology
|
69
| |||
Total
|
454
| ||||
| 8 |
Dayananda Sagar College of Engg.
|
248
|
3rd Batch
|
11.00 am
|
CSE / ISE Block
|
| 9 |
Sambhram Institute of Technology
|
129
| |||
Total
|
377
| ||||
| 10 |
Reva Institute of Technology
|
209
|
4th Batch
|
1.00 pm.
|
CSE / ISE Block
|
| 11 |
Vemana Institute of Technology
|
163
| |||
Total
|
372
| ||||
08 May 2010
GUIDELINES FOR THE PREPARATION OF 8th Sem B.E./B. Tech. PROJECT REPORTS
GUIDELINES FOR THE PREPARATION OF B.E./B. Tech. PROJECT REPORTS
1.Project reports should be typed neatly only on one side of the paper with 1.5 or double line spacing on a A4 size bond paper (210 x 297 mm). The margins should be: Left - 1.25", Right - 1", Top and Bottom - 0.75".
2.The total number of reports to be prepared are
- One copy to the department
- One copy to the concerned guide(s)
- Two copies to the sponsoring agency
- One copy to the candidate.
4. For making copies dry tone Xerox is suggested.
5.Every copy of the report must contain
- Inner title page (White)
- Outer title page with a plastic cover
- Certificate in the format enclosed both from the college and the organization where the project is carried out.
- An abstract (synopsis) not exceeding 100 words, indicating salient features of the work. (NB: four copies of the abstract are to be submitted to the Department on the date of submission separately)
| 6.The organization of the report should be as follows |
| Usually numbered in roman |
- Chapters
(to be numbered in Arabic) containing Introduction-, which usually specifies the scope of work and its importance and relation to previous work
and the present developments, Main body
of the report divided appropriately into chapters, sections and subsections.
- The chapters, sections and subsections
may be numbered in the decimal form for e.g. Chapter 2, sections as 2.1, 2.2 etc., and subsections as 2.2.3, 2.5.1 etc.
- The chapter must be left or right justified (font size 16). Followed by the title of chapter centered (font size 18), section/subsection numbers along with their headings
must be
left justified with section number and its heading in font size 16 and subsection and its heading in font size 14. The body or the text of the report
should have font size 12.
- The figures and tables must be numbered chapter wise for e.g.: Fig. 2.1 Block diagram of a serial binary adder, Table 3.1 Primitive flow table, etc.
- The last chapter should contain the summary of the work carried, contributions if any, their utility along with the scope for further work.
- For textbooks - A.V. Oppenheim and R.W. Schafer, Digital Signal Processing, Englewood, N.J., Prentice Hall, 3 Edition, 1975.
- For papers - Devid, Insulation design to combat pollution problem, Proc of IEEE, PAS, Vol 71, Aug 1981, pp 1901-1907.
- Only SI units are to be used in the report. Important equations must be numbered in decimal form for e.g.
- V = IZ .......... (3.2)
- All equation numbers should be right justified.
- The project report should be brief and include descriptions of work carried out by others only to the minimum extent necessary. Verbatim reproduction of material available elsewhere should be strictly avoided. Where short excerpts from published work are desired to be included, they should be within quotation marks appropriately referenced.
- Proper attention is to be paid not only to the technical contents but also to the organization of the report and clarity of the expression. Due care should be taken to avoid spelling and typing errors. The student should note that report-write-up forms the important component in the overall evaluation of the project
- Hardware projects must include: the component layout, complete circuit with the component list containing the name of the component, numbers used, etc. and the main component data sheets as Appendix. At the time of report submissions, the students must hand over a copy of these details to the project coordinator and see that they are entered in proper registers maintained in the department.
- Software projects must include a virus free disc, containing the software developed by them along with the read me file. Read me file should contain the details of the variables used, salient features of the software and procedure of using them: compiling procedure, details of the computer hardware/software requirements to run the same, etc. If the developed software uses any public domain software downloaded from some site, then the address of the site along with the module name etc. must be included on a separate sheet. It must be properly acknowledged in the acknowledgments.
- Sponsored Projects must also satisfy the above requirements along with statement of accounts, bills for the same dully attested by the concerned guides to process further, They must also produce NOC from the concerned guide before taking the internal viva examination.
- The reports submitted to the department/guide(s) must be hard bounded, with a plastic covering.
- Separator sheets, used if any, between chapters, should be of thin pape
NAME OF THE INSTITUTION
Address with pin code
Department of ……………………………………………………..
CERTIFICATE
Certified that the project work entitled ………………………………………………... carried out by Mr./Ms. ………………………….……………….., USN…………………..………, a bonafide student of …………………………………….in partial fulfillment for the award of Bachelor of Engineering / Bachelor of Technology in ……………………………...………………………….……… of the Visveswaraiah Technological University, Belgaum during the year ……………………... It is certified that all corrections/suggestions indicated for Internal Assessment have been incorporated in the Report deposited in the departmental library. The project report has been approved as it satisfies the academic requirements in respect of Project work prescribed for the said Degree.
Name & Signature of the Guide Name Signature of the HOD Signature of the Principal
Name of the examiners Signature with date
1
2.
Certificate issued at the Organization where the project was carried out
(On a separate sheet, If applicable)
NAME OF THE INDUSTRY / ORGANIZATION
Address with pin code
Address with pin code
CERTIFICATE
Certified that the project work entitled …………………………………………………………………………………………... carried out by Mr./Ms . ………………………………………….., USN…………………..………, a bonafied student of ……………………………………………………………………….in partial fulfillment for the award of Bachelor of Engineering / Bachelor of Technology in …………………………………………...………………………….……… of the Visveswaraiah Technological University, Belgaum during the year ……………………... It is certified that, he/she has completed the project satisfactorily
Name & Signature of the Guide Name & Signature of the Head of organization |
COLOUR OF THE OUTER COVER/FRONT PAGE OF UG DISSERTATION / PROJECT REPORT
|
| Color of the outer cover/front page of the report | |||||
1
|
| |||||
2
| CREAM | |||||
| 3 | Mechanical, Printing Technology, Mining, Industrial Production, Industrial Engineering & Management, Manufacturing Science and Engineering and Automobile (ME/PT/MI/IP/IM/ MA /AU) | SKY BLUE | ||||
| 4 | Civil, Transportation and Environmental Engineering (CV/TR/EV) | GREY | ||||
| 5 | Chemical, Cement & Ceramics, Silk, Textile Technology and Polymer Science (CH/CC/ST/TX/PM) | BROWN | ||||
DISTRIBUTION OF MARKS FOR B.E./B.TECH. DISSERTATION EVALUATION
| Sl. No. | Particulars | Max. Marks |
| 1 | Relevance of the subject in the present context | 10 |
| 2 | Literature Survey | 10 |
| 3 | Problem formulation | 10 |
| 4 | Experimental observation / theoretical modeling | 10 |
| 5 | Results – Presentation & Discussion | 10 |
| 6 | Conclusions and scope for future work | 10 |
| 7 | Overall presentation of the Thesis/Oral presentation | 40 |
| Total Marks | 100 |
29 March 2010
18 March 2010
Subscribe to:
Posts (Atom)